Apartment, Multifamily & Rental Property Access Control
Apartment building access control hardware: anti-clone readers with matched fob sets, QR visitor codes, 4G controllers for rentals and UHF tags for gates.
ValenID · valenid.com · sales@valenid.com
CA-140 Epoxy RFID Card, Custom Shape
Custom printed RFID cards with a transparent epoxy finish, LF or HF chip choices and a listed reader distance of 0–5 cm.
- Transparent epoxy finish over printed artwork
- Round, square and custom card outlines
- 125 kHz or 13.56 MHz chip options
- PVC / PET substrates with numbering and data-writing options
- 0–5 cm listed reader distance, dependent on setup
- Frequency
- 125 kHz or 13.56 MHz
- Read distance
- 0–5 cm, setup dependent
- Substrate
- PVC / PET
- Outline
- Round, square or custom
- Operating temperature
- –25 to +55 °C
Reply within 24 hours Tested before dispatch Worldwide shipping
Epoxy RFID Card, Custom Shape: overview
CA-140 is an epoxy-finished RFID card or small tag for membership credentials, admission tokens and product identification. The transparent finish gives printed artwork a raised appearance, while the underlying card can use a round, square or custom outline. PVC and PET are the listed substrate choices, so the finished format can be specified around the artwork and how users carry it.
Radio options span 125 kHz and 13.56 MHz. The chip list includes EM4200, TK4100, MIFARE Classic S50/S70, NTAG213/216, ICODE and DESFire options. Select the credential technology that the installed reader actually uses; these choices cover different data and authentication requirements. Memory is determined by the chip, rather than by the epoxy shape.
Available production operations include printing, screen printing, code marking, hot stamping, punching and data writing where the chip supports it. Identification or serial numbers can be marked on the card. Combined chip packaging is mentioned for custom work, but its configuration needs confirmation before it becomes an order specification.
The listed reader distance is 0–5 cm, depending on the reader and environment. Operation is specified at –25 to +55 °C and storage at –30 to +75 °C. The product description includes protection against dust and water without a numerical ingress grade; evaluate the finished sample for the intended exposure and approve the encoded data together with the print proof.
CA-140 specifications
Credentials & data
| Frequency | 125 kHz / 13.56 MHz, by selected chip |
|---|---|
| Chip options | EM4200, TK4100, MIFARE Classic S50/S70, NTAG213/216, ICODE, FM1108, DESFire options |
| Memory | Depends on chip |
| Read distance | 0–5 cm; depends on reader/environment |
| Data retention | 10 years stated; verify chip configuration |
| Write endurance | 100,000 cycles stated for writable configurations; confirm selected chip |
Finish & environment
| Substrate | PVC / PET |
|---|---|
| Outline | Round, square, irregular or custom |
| Finish | Epoxy coating with print, screen print, coding or hot stamping |
| Other operations | Data writing, punching and identification/serial marking |
| Operating temperature | –25 to +55 °C |
| Storage temperature | –30 to +75 °C |
Specifications can change between production batches. Confirm the current revision with us before placing volume orders.
Ordering options
Quote the SKU that matches your frequency, interface and mounting. Not sure? Send us your controller model and we will pick the variant for you.
| SKU | Configuration | Actions |
|---|---|---|
| CA-140-E | Epoxy credential with 125 kHz EM4200 or TK4100; specify chip | |
| CA-140-M | Epoxy credential with 13.56 MHz chip; specify exact technology |
Where the CA-140 is used
- Printed membership credentials
- Admission tokens with custom artwork
- Product identification tags with an epoxy finish
Gym & 24/7 Fitness Club Access Control Hardware
Gym access control system hardware for 24/7 clubs: fob and wristband readers, face and QR terminals, anti-passback controllers and no-touch exit buttons.
CA-140 FAQ
Can the artwork and shape be customized?
Yes. The card can be round, square, irregular or custom, with printed artwork and an epoxy finish.
Is it a writable card?
That depends on the chip ordered. The family includes multiple technologies; data writing applies to configurations that support it.
What read distance is listed?
The listed distance is 0–5 cm, with the actual result dependent on the reader and installation.
What are the temperature limits?
The listed operating range is –25 to +55 °C. Storage is specified at –30 to +75 °C.
Before you buy
Related buyer guides
125kHz vs 13.56MHz: Choosing Access Cards and Readers
125 kHz cards are cheap but easy to clone; 13.56 MHz cards add memory and, on DESFire-class chips, AES security. Compare range, chips, security and migration.
Wiegand 26-Bit Format Explained (with a Free Calculator)
Wiegand 26-bit is an even parity bit, 8-bit facility code, 16-bit card number and odd parity bit. Convert card numbers to hex and back with the calculator.
MIFARE Classic vs DESFire EV2/EV3: Security, Cost and Migration
MIFARE Classic's Crypto1 is broken and its cards can be copied; DESFire EV2/EV3 support AES-128. Compare security, memory and cost, then plan your migration.
Related products
CA-110
ABS RFID Key Fob, 125 kHz / 13.56 MHz
Pocket-size ABS key fob credentials with LF or HF chip options, custom colors and identification printing; listed read distance is 5–10 cm.
125 kHz or 13.56 MHz5–10 cm, reader dependentABS, epoxy filled
Details →
CA-190
SUS304 Metal RFID Key Fob
Stainless-steel and ABS key fobs with five chip configurations, including DESFire EV3; listed read distance is 0–3 or 0–4 cm by chip.
SUS304 stainless steel / ABS125 kHz or 13.56 MHz49.2 × 38 × 6.9 mm ±0.5 mm
Details →
CA-120
Soft RFID Wristband, 65 / 74 mm
Wearable LF or HF credentials with 65 or 74 mm diameter options, multiple colors and a listed 2–5 cm reading distance.
125 kHz or 13.56 MHz65 mm / 74 mm; customizable2–5 cm
Details →
CA-150
NTAG213 / NTAG216 NFC Card, 85.5 × 54 mm
13.56 MHz ISO/IEC 14443A NFC cards using NTAG213 or NTAG216, with custom artwork, data writing and a 0–5 cm listed read distance.
13.56 MHzISO/IEC 14443ANTAG213 or NTAG216
Details →
CA-130
Custom-Shaped RFID Card, LF / HF / UHF
Custom round, square or irregular RFID credentials with LF, HF or UHF chip options and configurable printing, coding and finish.
125 kHz / 13.56 MHz / 860–960 MHzRound, square, irregular or customPVC / PET
Details →
CA-160
125 kHz EM4100 / TK4100 Read-Only ID Card
Fixed-number 125 kHz proximity credentials for compatible readers, offered in thin, thick and custom card formats.
125 kHzEM4100 / EM4102 / TK4100Read-only fixed identifier
Details →
CA-170
13.56 MHz Classic 1K-Compatible Smart Card
Classic 1K-compatible credentials with 16 sectors and two key sets per sector, in an 86 × 54 × 0.87 mm PVC/PET format.
13.56 MHz1,024 bytes / 16 sectors86 × 54 × 0.87 mm
Details →
CA-180
13.56 MHz CPU Smart Card, 4K–32K
CPU-based 13.56 MHz cards with a chip operating system, 4K–32K memory choices and configurable card material and finish.
13.56 MHzISO/IEC 14443A4K / 8K / 16K / 32K
Details →
Get pricing for the CA-140
Send your card type, interface and quantity. You get a quote, lead time and compatibility notes within 24 hours — samples available for most items.