Apartment, Multifamily & Rental Property Access Control
Apartment building access control hardware: anti-clone readers with matched fob sets, QR visitor codes, 4G controllers for rentals and UHF tags for gates.
ValenID · valenid.com · sales@valenid.com
CA-110 ABS RFID Key Fob, 125 kHz / 13.56 MHz
Pocket-size ABS key fob credentials with LF or HF chip options, custom colors and identification printing; listed read distance is 5–10 cm.
- ABS shell with epoxy fill and ultrasonic welded assembly
- 125 kHz or 13.56 MHz chip configurations
- Listed sensing distance of 5–10 cm
- Custom shapes, colors and printed or engraved identifiers
- IP67 / IP68 enclosure options; confirm the ordered design
- Frequency
- 125 kHz or 13.56 MHz
- Read distance
- 5–10 cm, reader dependent
- Housing
- ABS, epoxy filled
- Dimensions
- Customizable
- Marking
- Screen print, code print or engraving
Reply within 24 hours Tested before dispatch Worldwide shipping
ABS RFID Key Fob, 125 kHz / 13.56 MHz: overview
CA-110 is a key fob credential for access doors, attendance readers and membership systems where a full-size card is inconvenient. Its ABS enclosure holds the chip and antenna in an epoxy-filled assembly, joined by ultrasonic welding. The housing can hang from a key ring, keeping the credential with the keys a user already carries.
Choose the chip before choosing the color. The family covers 125 kHz options such as TK4100, EM4200 and T5577, and 13.56 MHz options including MIFARE Classic S50/S70 and ICODE. These are alternative configurations; the frequency list does not mean every fob contains both technologies. Match the exact chip and reader behavior to the credential population already enrolled in your controller.
The listed sensing distance is 5–10 cm. Treat that as a starting point for a sample check with your installed reader, rather than a promised distance for every shell and chip combination. Shapes and dimensions can be customized, while the color range includes yellow, blue, red, white, gray, green and black.
Screen printing, identification codes and engraved markings are available for administration. A printed number must use the same convention as the issuing software if staff will enter it manually. The enclosure information lists IP67 and IP68; confirm the rating for the particular housing ordered before using it in a wet installation.
CA-110 specifications
RF & credentials
| Frequency | 125 kHz / 13.56 MHz, according to chip |
|---|---|
| Chip options | TK4100, EM4200, T5577, MIFARE Classic S50/S70, ICODE; confirm exact chip |
| Sensing distance | 5–10 cm |
Housing & customization
| Materials | PVC / ABS listed; ABS shell with epoxy fill |
|---|---|
| Assembly | Ultrasonic plastic welding |
| Size | Customizable |
| Colors | Yellow, blue, red, white, gray, green, black and custom options |
| Identification | Screen printing, code printing and engraving |
| Ingress information | IP67 / IP68 listed; confirm rating for selected housing |
Specifications can change between production batches. Confirm the current revision with us before placing volume orders.
Ordering options
Quote the SKU that matches your frequency, interface and mounting. Not sure? Send us your controller model and we will pick the variant for you.
| SKU | Configuration | Actions |
|---|---|---|
| CA-110-E | 125 kHz fob; specify TK4100, EM4200 or T5577 | |
| CA-110-M | 13.56 MHz fob; specify MIFARE Classic S50/S70 or ICODE chip |
Where the CA-110 is used
- Resident door credentials carried on a key ring
- Attendance credentials issued to staff
- Color-coded membership fobs
Elevator Access Control Readers
Elevator card readers for car panels and lift lobbies: anti-clone encrypted cards, QR codes for visitors, Wiegand or RS485 output to the floor controller.
Gym & 24/7 Fitness Club Access Control Hardware
Gym access control system hardware for 24/7 clubs: fob and wristband readers, face and QR terminals, anti-passback controllers and no-touch exit buttons.
CA-110 FAQ
Does one fob support both frequencies?
The family offers 125 kHz and 13.56 MHz configurations. Specify the required chip; a combined dual-frequency build is not documented.
Can the enclosure and color be customized?
Yes. The shape and size are customizable, with multiple standard colors and printing or engraving options.
What distance is listed?
The listed distance is 5–10 cm. Check the chosen chip and housing with the reader used in your installation.
Can identification numbers be printed?
Yes. Code printing and engraving are offered alongside screen printing. Set the required numbering convention when ordering.
Before you buy
Related buyer guides
125kHz vs 13.56MHz: Choosing Access Cards and Readers
125 kHz cards are cheap but easy to clone; 13.56 MHz cards add memory and, on DESFire-class chips, AES security. Compare range, chips, security and migration.
Wiegand 26-Bit Format Explained (with a Free Calculator)
Wiegand 26-bit is an even parity bit, 8-bit facility code, 16-bit card number and odd parity bit. Convert card numbers to hex and back with the calculator.
MIFARE Classic vs DESFire EV2/EV3: Security, Cost and Migration
MIFARE Classic's Crypto1 is broken and its cards can be copied; DESFire EV2/EV3 support AES-128. Compare security, memory and cost, then plan your migration.
Related products
CA-190
SUS304 Metal RFID Key Fob
Stainless-steel and ABS key fobs with five chip configurations, including DESFire EV3; listed read distance is 0–3 or 0–4 cm by chip.
SUS304 stainless steel / ABS125 kHz or 13.56 MHz49.2 × 38 × 6.9 mm ±0.5 mm
Details →
CA-120
Soft RFID Wristband, 65 / 74 mm
Wearable LF or HF credentials with 65 or 74 mm diameter options, multiple colors and a listed 2–5 cm reading distance.
125 kHz or 13.56 MHz65 mm / 74 mm; customizable2–5 cm
Details →
CA-150
NTAG213 / NTAG216 NFC Card, 85.5 × 54 mm
13.56 MHz ISO/IEC 14443A NFC cards using NTAG213 or NTAG216, with custom artwork, data writing and a 0–5 cm listed read distance.
13.56 MHzISO/IEC 14443ANTAG213 or NTAG216
Details →
CA-130
Custom-Shaped RFID Card, LF / HF / UHF
Custom round, square or irregular RFID credentials with LF, HF or UHF chip options and configurable printing, coding and finish.
125 kHz / 13.56 MHz / 860–960 MHzRound, square, irregular or customPVC / PET
Details →
CA-140
Epoxy RFID Card, Custom Shape
Custom printed RFID cards with a transparent epoxy finish, LF or HF chip choices and a listed reader distance of 0–5 cm.
125 kHz or 13.56 MHz0–5 cm, setup dependentPVC / PET
Details →
CA-160
125 kHz EM4100 / TK4100 Read-Only ID Card
Fixed-number 125 kHz proximity credentials for compatible readers, offered in thin, thick and custom card formats.
125 kHzEM4100 / EM4102 / TK4100Read-only fixed identifier
Details →
CA-170
13.56 MHz Classic 1K-Compatible Smart Card
Classic 1K-compatible credentials with 16 sectors and two key sets per sector, in an 86 × 54 × 0.87 mm PVC/PET format.
13.56 MHz1,024 bytes / 16 sectors86 × 54 × 0.87 mm
Details →
CA-180
13.56 MHz CPU Smart Card, 4K–32K
CPU-based 13.56 MHz cards with a chip operating system, 4K–32K memory choices and configurable card material and finish.
13.56 MHzISO/IEC 14443A4K / 8K / 16K / 32K
Details →
Get pricing for the CA-110
Send your card type, interface and quantity. You get a quote, lead time and compatibility notes within 24 hours — samples available for most items.